Description
HTF’100G QSFP28 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control 4- Distributed Feedback Laser (DFB) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm.
The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.
Applications
Data Center
Local Area Network (LAN)
Ethernet switches and router applications
Telecom
Compatible brands
HTF optional transceiver have been successfully tested with below brands:
| HTF 100GBASE-LR4 QSFP28 1310nm 10km DOM LC SMF transceiver Compatible with the following brand and more |
| Cisco QSFP-100G-LR4-S 10km |
Arista Networks 100GBASE-LR4 10km |
| Juniper Networks JNP-QSFP-100G-LR4 10km |
Brocade 100G-QSFP28-LR4-10KM |
| Dell 407-BCDH Compatible 10km |
Extreme 100G-QSFP28-LR4-10KM |
| HW 02311KNU |
H3C QSFP-100G-LR4-WDM1300 |
| Ciena QSFP28-LR4 10km |
Mellanox MMA1L10-CR |
| Generic Compatible 100GBASE-LR4 |
FS QSFP28-BLR4-100G |
| Edge-Core ET7402-LR4 |
Alcatel-Lucent 3HE10550AA |
| Avago QSFP28-100G-LR4 |
Allied Telesis QSFP28-LR4 |
| Check Point CPAC-tr-100LR 10km |
Chelsio SM100G-LR 10km |
| D-Link DEM-Q2810Q-LR4 |
F5 Networks F5-UPG-QSFP28-LR4 |
| Fortinet FN-trAN-QSFP28-LR |
Ixia QSFP28-LR4-XCVR |
| Mikrotik Q28+31DLC10D 10km |
MRV QSFP28-100GE-LR4 |
| Palo Alto Networks PAN-QSFP28-100GBASE-LR4 |
| Support Customized 100GBASE-LR4 QSFP28 1310nm 10km DOM LC SMF transceiver Module |
Ordering Information
| Part Number |
Package |
Data Rate |
Reach |
Wavelength |
TX output |
RX Sensitivity |
Power Consumption |
Interface |
| HTQS-HM85S |
QSFP28 SR4 |
100Gbps |
100m |
850nm |
-8.4～2.4dBm |
-10.3dBm |
<2W |
MPO/MTP |
| HTQS-HS4CL |
QSFP28 LR4 |
100Gbps |
10km |
LAN WDM |
-4.3～4.5dBm |
-10.6dBm |
<3.5W |
LC |
| HTQS-HS4CE |
QSFP28 ER4 |
100Gbps |
40km |
LAN WDM |
-2.9～4.5dBm |
-14.6dBm |
<4.5W |
LC |
| HTQS-HS4CZ |
QSFP28 ZR4 |
100Gbps |
80km |
LAN WDM |
+2.0 ～ +6.5dBm |
-28dBm |
<6.5W |
LC |
| HTQS-HSC4CL |
QSFP28 CWDM4 |
100Gbps |
2km |
CWDM |
-6.5～2.5dBm |
-10dBm |
<3.5W |
LC |
| HTQS-PSM4L2 |
QSFP28 PSM4 |
100Gbps |
2km |
1310nm |
-6.0～2.0dBm |
-11.3dBm |
<3.5W |
MPO/MTP |
If you have customized requirement for the TX output, RX Sensitivity etc, contact HTF sales online or leave message.
HTF team will support you within 24 hours.
