100Gbps CFP4 LR4 10km
Features
● Compliant with 100GBASE-LR4
● Support line rates from 103.125 Gb/s to 111.81 Gb/s
● Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF
● CAUI(10x10G) Electrical Interface and 4-lane 25.78Gb/s optical interface
● Duplex LC optical receptacle
● Support Digital Diagnostic Monitoring interface
● No external reference clock
● RoHS-6 compliant and lead-free
● Single +3.3V power supply
● Maximum power consumption 6.0W
● All-metal housing for superior EMI performance
● Case operating temperature
● Commercial: 0 ~ +70oC
Description  
HTF’100G CFP4 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. 

The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.

Applications
Data Center 
Local Area Network (LAN) 
Ethernet switches and router applications

Compatible brands 
HTF optional transceiver have been successfully tested with below brands:
HTF CFP4 100GBASE-LR4 1310nm 10km DOM LC SMF Compatible with the following brand and more
Cisco CFP4-100G-LR4 Juniper Networks CFP4-100GBASE-LR4
Arista Networks CFP4-100G-LR4 Brocade CFP4-100G-LR4
Dell CFP4-100GBASE-LR4 Extreme Networks CFP4-100G-LR4
Generic 100GBASE-LR4  
Support Customized CFP4 100GBASE-LR4 and OTN 1310nm 10km DOM LC SMF Module

Ordering Information
Part Number Package Data Rate Reach Wavelength TX output RX Sensitivity Power 
Consumption
Interface
HTCF-HSC4L CFP LR4 100Gbps 10km LAN WDM -4.3~4.5dBm -10.6dBm <12W LC
HTC2-HS4CL CFP2 LR4 100Gbps 10km LAN WDM -4.3~4.5dBm -8.6dBm <6W LC
HTC2-HS4CE CFP2 ER4 100Gbps 40km LAN WDM -2.9~2.9dBm -21.4dBm <9W LC
HTC4-HS4CL CFP4 LR4 100Gbps 10km LAN WDM -4.3~4.5dBm -8.6dBm <6W LC

If you have customized requirement for the TX output, RX Sensitivity etc, contact HTF sales online or leave message. 
HTF team will support you within 24 hours.  
Submit the following information then can download and know more